Certified Server Hardware (Level 1, 2, and Partner Certified) Manufacturer/Distributor Model Certification Level* Comment Dell PowerEdge R905 (Gateway) L2 Certified with SIR. Fujitsu Primergy RX300 S5 (Gateway) L2 Certified with CDP/NSS 6.15.   Primergy RX300 S6 (Gateway) L2 Certified with CDP/NSS 6.15. Hitachi HA8000/RS220 (AH) (Gateway) L2 Certified with CDP/NSS 6.0. HP ProLiant DL360 G5 (Gateway) L2 Certified with CDP and NSS 6.15.   ProLiant DL370 G6(Gateway) L2 Certified with SIR 6.5 and VTL 5.2.   ProLiant DL385 G5p (Gateway) L2 Certified with CDP, FDS, NSS, SIR, VTL, and VTL-S.   ProLiant DL385 G6 (Gateway) L2 Certified with CDP/NSS. IBM x3500 L2   Intel SR2612 (Storage) L2 Intel chassis SR2612 (Timber Creek). Certified with CDP/NSS 6.1.   SR4850HW4 (Gateway) L2 Certified with VTL 5.1. LeftHand Networks NSM 2060 Partner Certified     NSM 2120 Partner Certified     NSM 4150 Partner Certified   Starline SC-FALC-NSS (Gateway) Partner Certified Tested and certified with easyRAID, Infortrend and TopRAID (LSI Engenio) storage systems.   SC-FALC-VTL-S (Gateway) Partner Certified Tested and certified with easyRAID, Infortrend and TopRAID (LSI Engenio) storage systems. SUN Sun Fire V40Z Partner Certified     Sun Fire V65X Partner Certified     Sun Fire X4150 Partner Certified     Sun Fire X4200 Partner Certified On board LSI SAS 1064 storage controller with driver compiled by FalconStor.   Sun Fire X4250 Partner Certified     Sun Fire X4270 L2 Certified with VTL5.1 SP1, VTL 5.2, and SIR 6.50.   Sun Fire X4450 Partner Certified     Sun Fire X4600 Partner Certified     Sun Fire X4640 L2 Certified with VTL-S 5.2

 

* Certification Levels:
L4 - Preferred Hardware - Fully certified by FalconStor’s certification team with the latest GA product version, L4 hardware has passed a full suite of functionality and stress tests and is certified with FalconStor EZStart version 2.3.34 and Web Setup. An EZStart USB image is available for installation. The EZStart image contains all required hardware management tools to send Email Alerts for hardware related failures and warnings. Power control is also integrated via IPMI or iLO. For storage servers (with internal storage), the EZStart process performs all steps necessary to prepare the hardware as a turnkey appliance.
L3 - Fully certified for functionality and performance by FalconStor’s certification team, L3 hardware has passed a full suite of functionality and stress tests and is certified with FalconStor EZStart and Web Setup. An EZStart USB image is available but may not have full integration with server hardware.
L2 - Limited certification by FalconStor’s certification team, L2 hardware is verified with FalconStor EZStart and Web Setup. FalconStor has performed basic testing of this device, including feature functionality and advanced failure conditions. Most configurations are supported.
L1 - Not certified by FalconStor’s certification team but known to work with FalconStor solutions, including the use of the EZStart USB image. Web Setup can be used.
Partner Certified – Certified by a FalconStor partner and sold and supported as part of the partner’s solution.

All equipment is certified as of the date it was added to this matrix. FalconStor is not responsible for any operational problems resulting from modifications made by the equipment manufacturer after the equipment was certified. This list is subject to change at any time without notice. Different FalconStor products can use the same model appliance, but may have different hardware requirements (such as amount of RAM, number of drives, etc.). Contact FalconStor directly for a detailed Bill of Materials for each L4 product/model combination.