ARCHIVED RECOVERY HARDWARE FOR FALCONSTOR RECOVERTRAC
The servers listed on this page were certified with older versions of FalconStor software.
NOTE: You should use caution before deploying RecoverTrac with a white box appliance or machine with pre-existing hardware compatibility issues. You must also be sure that your appliance uses a supported boot adapter and storage controller.
| Manufacturer | Model | Components | RecoverTrac Version | CDP/NSS Version |
| Dell | PowerEdge R710 | – QLogic QLE2462 – QLogic QLE2562 – LSI FC949E – Emulex LightPulse LPe1150-E – Broadcom BCM5708 |
2.50 | CDP/NSS 7.00 |
| PowerEdge R900 | – Dell PERC 6/I Integrated RAID Controller – QLogic QLE2562 – Broadcom BCM5708C NetXtreme II GigE |
2.50 | CDP/NSS 7.00 | |
| Hitachi | BladeSymphony BS520 | 2.50 | CDP/NSS 7.00 | |
| BladeSymphony BS320 | 2.50 | CDP/NSS 7.00 | ||
| HA8000/RS220 | 2.50 | CDP/NSS 7.00 | ||
| HP | ProLiant DL380 G4 | – HP Smart Array 6i Controller – QLogic QLA2342 |
2.50 | CDP/NSS 7.00 |
| ProLiant DL385 G7 | – Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client) – HP Smart Array P410i Controller – HP StorageWorks FC2242SR Emulex |
2.50 | CDP/NSS 7.00 | |
| ProLiant DL580 G7 | – HP Smart Array P410i Controller – HP NC375i Integrated Quad Port Multifunction Gigabit – HP StorageWorks 82Q QLogic |
2.50 | CDP/NSS 7.00 | |
| ProLiant DL585 G6 | – HP Smart Array P410 Controller – QLogic QLE2562 – Broadcom BCM5706C |
2.50 | CDP/NSS 7.00 | |
| IBM | System x3650 | – IBM ServeRAID 8k/8k-l SAS/SATA – QLogic QLE2462 – Broadcom BCM5708 |
2.50 | CDP/NSS 7.00 |
| System x3690 X5 | – Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client) – Brocade 8Gb FC Dual-port HBA for IBM System x – IBM Corporation ServeRAID-BR10i V2 SAS/SATA |
2.50 | CDP/NSS 7.00 | |
| System x3850 X5 | – Broadcom BCM5709C NetXtreme II GigE (NDIS VBD Client) – IBM Corporation ServeRAID-M5015 SAS/SATA – QLogic 8Gb FC Dual-port HBA for IBM System x |
2.50 | CDP/NSS 7.00 |
All equipment is certified as of the date it was added to this matrix. FalconStor is not responsible for any operational problems resulting from modifications made by the equipment manufacturer after the equipment was certified.This list is subject to change at any time without notice. Contact FalconStor for additional information prior to deployment.
Last modified on : 06/06/2014