RECOVERY HARDWARE FOR FALCONSTOR RECOVERTRAC
RecoverTrac supports various combinations of recovery for both physical and virtual machines: Physical-to-Physical (P2P), Virtual-to-Physical (V2P), Physical-to-Virtual (P2V), and Virtual-to-Virtual (V2V).
If recovering back to an identically configured physical machine (P2P or V2P), RecoverTrac will work regardless of whether or not your hardware is listed below.
RecoverTrac supports V2V where the virtual machines use physical VMware Raw Device Mapping (RDM), Hyper-V pass-through disks, or when the virtual machines are protected by FalconStor Disksafe.
While most systems from major hardware vendors (including Dell, Hitachi, HP, and IBM) can be used as recovery machines, FalconStor or a partner has explicitly tested the following server hardware for V2P recovery. If you wish to certify other hardware with RecoverTrac, contact FalconStor to request a formal certification process. We will make all efforts to comply but, due to time and resource constraints, we may be unable to accommodate all requests.
For information about servers certified with previous FalconStor product versions, check our Archived Recovery Hardware for FalconStor RecoverTrac page.
NOTE: You should use caution before deploying RecoverTrac with a white box appliance or machine with pre-existing hardware compatibility issues. You must also be sure that your appliance uses a supported boot adapter and storage controller.
| Manufacturer | Model | Components | RecoverTrac Version |
| Dell | PowerEdge R200 | – QLogic QLE2562 – Broadcom BCM5750 |
2.60 |
| PowerEdge R710 | – QLogic QLE2462 – Broadcom BCM5708 |
2.90, 2.80 | |
| – QLogic QLE2462 – QLogic QLE2562 – LSI FC949E – Emulex LightPulse LPe1150-E – Broadcom BCM5708 |
2.70, 2.60 | ||
| PowerEdge R720 | – QLogic QLE2462 | 2.80 | |
| PowerEdge R720xd | – QLogic QLE2462 | 2.80 | |
| PowerEdge R805 | – QLogic QLE2462 – Broadcom BCM5708 |
2.80 | |
| – QLogic QLE2462 – QLogic QLE2562 – Broadcom BCM5708 – Dell PERC 6/i Integrated RAID Controller |
2.70, 2.60 | ||
| PowerEdge SC1430 | – QLogic QLE2462 – Broadcom BCM5709 |
2.80 | |
| – QLogic QLE2462 – QLogic QLE2562 – Broadcom BCM5709 |
2.70, 2.60 | ||
| HP | ProLiant DL360 G7 | – HP Smart Array P410i Controller – QLogic QLE2562 – Broadcom BCM5709C NetXtreme II GigE |
2.70 |
| ProLiant DL380 G6 | – QLogic QLE2562 | 2.60 | |
| ProLiant DL380 G7 | – QLogic QLE2462 – HP NC382i Dual Port Multifunction Gigabit NIC |
2.80 | |
| – QLogic QLE2562 – Broadcom BCM5709 |
2.80, 2.70 | ||
| IBM | System x3650 M3 | – QLogic QLE2562 – Broadcom BCM5709 |
2.80 |
| – QLogic QLE2562 – IBM ServeRAID-M5015 SAS/SATA |
2.60 |
All equipment is certified as of the date it was added to this matrix. FalconStor is not responsible for any operational problems resulting from modifications made by the equipment manufacturer after the equipment was certified.This list is subject to change at any time without notice. Contact FalconStor for additional information prior to deployment.
Last modified on : 03/23/2015